H100-Four0-One thousand and twenty-four-BL-4
The shrapnel is fixed.
pulse10Two4Signal output: push-pull output, collector open-circuit output, long-line drive outputABZWith signal, voltage:DC5V;
contain4mLong-term.
1Axle Diameter:30, 35, 3Eight,Forty-two,45Hollow
2Number of pulses100-200-.512.1024.4096-5400p/r
3VoltageDC 5V-30V
4Output signalAmutually.Bmutually.Zmutually
5Output Form:Open collector output, push-pull output, long-line drive output
6Maximum response frequency300 kHz
SevenMaximum speed:3500r/min
8Protection level:IP50
New Structure FixedThe axle adopts a completely new clamping fixing method, which abandons the problem of old-fashioned top wire fixing not tightly.。 The encoder body is fixed by shrapnel.
use Path: Asynchronous Elevator Speed Control and Industrial Automation Control
Regulations Lattice: Incremental, Hollow Shaft
Outside Diameter: 80mm, 90mm 100mm
· Axis aperture: 30, 35, 38, 40, 42, 45, 50, 55, etc. (optional)
· Resolution: 10P/R-1024P/R, 2000P/R-5000P/R (optional)
Electricity Pressure: DC5-30V
· Appearance mode: computer socket side-outcable side-out
· Output mode: Voltage output, long-line drive output, open collector output, complementary output, etc. (optional)
Excellent Point: Stable performance, strong anti-interference
Parameters: The number of pulses is optional.DC5V-30VPower supply, maximum mechanical speed 8000 rpm, response frequency: 0-300KHz, consumption current: <150MA.
Output:The output circuit hasNPN(PNP) collector open-circuit output typevoltage type,complementary type and long-line drive type(RS422)(Note: There is no voltage output when the collector is not connected with pull-up resistance)
Purpose:Servo Motor, CNC Machine Tool, Elevator, Door Machine