The latest upgrade, high power DC motor. Fully compatible with and superior to Infineon solutions.
Video of motor drive test youku:
Product Features:
(1) HMD-02A high-power motor drive module is designed for small high-power DC motors;
(2) An isolation circuit is installed between the driving chip and the control signal to effectively protect the single chip computer;
(3) The driving chip uses a MOS tube driving motor, which generates extremely low heat;
(4) The output of the driving chip has low internal resistance, large driving current, and good acceleration and braking effects;
(5) The motor drive module uses an H-bridge circuit to drive the motor, which can control the motor's forward and rotation;
(6) The control circuit is simple,Just 3 control lines;
(7) Wide range of motor drive power (3-25V),With overcurrent protection function;
(8) The drive module of the motor is small in size;
The specific parameters are as follows:
Working voltage: 3 V-25V
Working frequency: 0-40KHZ
Drive current: 90 A peak
Drive type: MOSFET
On-state resistance: 5.7mΩ (milliohm)
Module size: 41mm * 33mm
PWM duty cycle: 0 to 98%
Note: 1. The above parameters are measured at 25 degrees Celsius.
This drive has a brake function that quicklyThe motor brakes and brakes quickly,The braking is obvious, and achieving this effect is simple and easy to operate.It has been evaluated by many Amoy friends to be better than driver chips such as MC33886 and discrete driversBraking effect.
This drive uses a completeFull bridge driver chip+Very low internal resistance MOSFETcomposition. The complete full-bridge driver chip has a reliable driving method, which minimizes the switching losses of the MOSFET. Improve power utilization. MOSFET driver chip comes withHardware brakeCan andEnergy feedbackFeatures.
Interface Description:
provide:A copy of c51 drive test program, the function functions include forward rotation, braking, rotation; a manual (Send by email).